Regardless of the cause, dents on your car are inevitable. They could be caused by an accident, a fallen tree branch, shopping cart, among others. () The worst thing about dents is that they ruin that pristine outlook you’ve been maintaining for your car. It’s right to say that dents on your car are frustrating, and that’s why most people always want to fix them as soon as possible. Several services can help you get rid of dents on your car. Some of these services are offered by car dealers, while others are offered by independent businesses.

However, if you’re looking to fix these dents by yourself, it is doable in some cases using the right tools. Here are the various ways you can repair dents on your car:

1. Using a Plunger

Using a plunger to repair a dent on your car is usually best applicable to those large and shallow dents. It’s important to note that regardless of the plunger you’re using, a sink plunger or an automotive one, they do not fix the creases that appear on the steel. Here is the procedure for fixing a dent using a plunger:

– Moisten the rubber end of the plunger using some water and a damp cloth for the suction surface.
– Position the plunger at the center of the dent and press it into the car. If the dent is bigger than the surface of the plunger, it’s better to start from its edges. If the dent is smaller, place the plunger directly above it.
– Pull out the plunger repeatedly until the dent is fixed.

2. Pressing Dents from Behind

This method works best for dents at the edges of your vehicle. Before attempting this method, it’s better to consider if the dent is located somewhere you can access by removing some car components. Here is the procedure you need to follow:

– Remove the body components of your vehicle if the dent is very close to them.
– Locate the back of the dent. It’s even better to jack up your car to access the dent from the inside.
– Apply pressure to the backside of the dent. For the smaller dents, you might need to use a hard surface such as a wooden mallet covered with a cloth. For the bigger dents, you can use your hands to press against them.

3. Using a Hairdryer

For this method, you’ll need a hairdryer and compressed air. You start the procedure by switching on the hairdryer and hitting up the dent with its highest temperature. This is likely to make the surface expand. After it has expanded, place the can of compressed air upside down. Now start spraying on the dent until it cools. The contraction of the dented surface will make the dent pop out; for the liquid left behind by the air compressor, it’s best to use a clean and soft cloth to wipe it out.

4. Using Boiling Water

It might come as a surprise to you, but boiling water is one of the effective ways you can repair a dent in your car. When most minor accidents happen, the bumper is the most affected part. The dent caused in these types of accidents can be best fixed with boiling water, but first, you’ll need to remove the bumper. Once the bumper is off, start pouring hot water on the dent. The heat will cause the surface to expand, and now you can start pressing it from behind. Due to the heat, it’s easier to put back the surface into its original shape. However, once you’ve popped the dent into its original shape, pour down some cold water on the surface for the surface to shrink back into place.

5. Professional Dent Repair

While fixing small dents using homemade tools is cheap, the bigger dents require the attention of a professional. The best thing about going for a professional to fix a dent in your car is that they’re trained to analyze the damage based on the type of vehicle, size, and location of the dent. The right experts such as from pdrcanada.ca use industry-leading tools that ensure the dent is fixed without inflicting further damage on your vehicle. They will also ensure that the paint on your vehicle is well taken care of.

When fixing dents on your vehicle, it’s important to be careful. If the dent appears to be at a position you cannot use any DIY tools on, it’s best to get the help of a professional so that you don’t end up damaging your vehicle even more.